|
Title: aristocrat mark 6 button power problem Post by: kenokarz on March 21, 2012, 11:30:41 AM got a mark 6/ all deck buttons are dead no power, never heard of a back plane going bad, check all the wires to the back plane , reset the plug, made sure no wires are shorted at the door area, any idea before i take the back plane board out ,checked the cpu and i/o board in another machine they are ok, no lights on buttons and no reponse to the machine when you push on them, :103-
Title: Re: aristocrat mark 6 button power problem Post by: Gaming1 on March 23, 2012, 04:34:56 AM Sounds like you have no 24v is the note acceptor working and the key switch on the side
Title: Re: aristocrat mark 6 button power problem Post by: kenokarz on March 23, 2012, 10:18:56 AM yes, changed power supply also, the more i get into it . it has to be the backplane, or could be button harness. i have parts coming i hope and will let you guys know what i find, but as far as i can tell harness looks good i put it in a mvp540 but pin outs are not the same , but have not had a machine that beat me yet , it just takes more time to fix, good thing this one for myself :89- :89-
Title: Re: aristocrat mark 6 button power problem Post by: GameTek USA on March 26, 2012, 05:17:18 PM You check your driver board ? Its a small card which controls the button power and has 2 ejection levers on each side.
Title: Re: aristocrat mark 6 button power problem Post by: kenokarz on March 26, 2012, 05:20:29 PM will try that tonight , never thought of that :25- :25- will let you know
Title: Re: aristocrat mark 6 button power problem Post by: GameTek USA on March 26, 2012, 05:27:43 PM Im almost 100 % that's what it is, Those drive your 24V or 12V for the buttons.
Title: Re: aristocrat mark 6 button power problem Post by: kenokarz on March 27, 2012, 10:29:48 AM did the simm change, used 6 and nothing more than what i already have, :103- :103- so will wait for the backplane and button panel assy and test each one and let every one know whats up, thanks for the tip, but i think i got something else going on in this one
Title: Re: aristocrat mark 6 button power problem Post by: kenokarz on March 27, 2012, 10:31:38 AM did you have the simm #s im to use ??? maybe using wrong one ??? part # for the one im to use???
Title: Re: aristocrat mark 6 button power problem Post by: GameTek USA on March 27, 2012, 06:28:28 PM You mean the Comms Config Card on the main Logic ?
Title: Re: aristocrat mark 6 button power problem Post by: kenokarz on March 27, 2012, 06:39:53 PM yes the siim card on the side of the xp board, just like a computer ram card
Title: Re: aristocrat mark 6 button power problem Post by: Gaming1 on March 28, 2012, 01:18:40 AM Not certain where the machine is from. but hat board is only a comms board for printers or RS232. The board they are talking about is under the processor board on the left and has one pic chip and some surface mounted ics and is marked driver board.tha is if it is a NSW machine
Title: Re: aristocrat mark 6 button power problem Post by: GameTek USA on March 28, 2012, 04:27:23 AM Yea this is the comms config board but I wouldn't worry about this. If you have no 12V or 24V to your buttons its the Driver board. This would be the problem.
Title: Re: aristocrat mark 6 button power problem Post by: kenokarz on March 28, 2012, 10:30:38 AM already replaced the cpu, and the board under it the i/o driver board from another machine, this is a usa game, replaced power supper also, i have a button panel coming/ with harness and the back board , hope that does it , will try new harness 1st unless it a wire problem in the main harness some place :37- :37-
|