|
Title: multi download tools Post by: brianfink on March 22, 2012, 01:28:44 AM I have an older dbv multi download tool i'm not sure of the model number but it was manufactured in 2000. And I bought a cable from jcm for the wba just to see if it was compatible and it seems to be but when I put in an eprom for any wba software on a 4001 or 1001 chip the download led does not light. When I put in the dbv 200 software on a 4001 4meg chip it works fine it will even download it onto a wba. Just wondering if any one had any suggestions on what I might be able to do to make this work.
Title: Re: multi download tools Post by: JCM Tech on April 07, 2012, 05:51:41 AM The reccommended EPROM for 1 meg programs is 1 Mbit, 90 nano-second data access, or faster. ST Part M27C1001-90 or equivalent. for a 4 meg program it is 4 Mbit, 90 nanosecond data access or faster. ST Part M27C4001-90 or equivalent.
You can look this up in the Software section of the JCM site http://www.jcmglobal.com/en/support/downloads/SoftwareInfo.aspx Title: Re: multi download tools Post by: brianfink on April 08, 2012, 12:31:53 PM well I know the chips i'm using work fine when i put them in an eprom based bill validator but when I put it into my download tool it just wont seem to work I guess I just need a newer one
|