|
Title: ID another slot Post by: litterbox99 on March 27, 2012, 10:27:31 PM I recently picked this unit up.
The metal plate on the cab says; E2114-73 The reel strips are E2114-73 The CPU & I/O board are labeled E2114-75 The Roms are 755-49,755-50,755-134 & P1= E2214-75 Test six = 148087 The slot works for the most part (pay outs wrong), but I'm guessing it has the wrong reel strips (the difference between -73 & -75) I like the small cab, so I want to fix it up. The glass is cooked and peeling real bad... I don't even know if the glass is correct for either software versions. I want to convert it to something. Looking for reel strips/glass kit or something... Title: Re: ID another slot Post by: OldReno on March 27, 2012, 11:00:39 PM Could it be that someone put the wrong reel in the wrong place when working on it?
They might be marked. Title: Re: ID another slot Post by: litterbox99 on March 27, 2012, 11:15:52 PM The reels are in the correct order from left to right.
Someone probably just put the wrong reel mech in the slot to 'make' it look complete or they didn't know that the reels have to match the P1 and they looked close. I'll double check.... Title: Re: ID another slot Post by: litterbox99 on March 27, 2012, 11:25:45 PM The reels are in order.
labled, M-239; 1028,1029 & 1030 Title: Re: ID another slot Post by: OldReno on March 27, 2012, 11:27:26 PM Or they didn't test it before letting it go out....
Shame. The reel #'s and strip #'s should be sequential I'm thinking if they are correct. |