|
Title: Hopper questions "Bally 6000" Post by: rrebel98 on April 04, 2012, 10:15:51 PM Hi all,
If you switch out a hopper example nickel to quarter or quarter to nickel size do you need to do any programming or is it plug and play ? How can you tell if you have larger size hopper or smaller I only ask because a seller said in his description that he had a smaller size available for quarters. I compared to another picture and also to mine they all look the same. Im sure its capacity. Anyone have an idea ? Thanks Title: Re: Hopper questions "Bally 6000" Post by: bruno on April 05, 2012, 01:43:16 AM Hi,
When you change the diameter of coins, you can either install a new hopper, or change the pin wheel and the shelf wheel on the existing hopper. Concerning the capacity, I think there are 2 sizes. My 6000s have 2 different models. Look at the 1st pic of the post from Ford >>> http://newlifegames.net/nlg/index.php?topic=17749.0 The upper one has a "standard capacity", the one below has a "higher capacity" (Ford, thank you for correcting me if I'm wrong) Bruno |