|
Title: wba jcm Post by: Rene on March 09, 2012, 05:46:17 PM hello: I have a validator wba jcm start very slow and sometimes fails.
if anyone knows anything about this problem please help me. Thank you. Title: wba jcm Post by: Buzz on March 09, 2012, 06:06:25 PM Rene If you click on the Blue tab Forum Index and go down to WBA's you will find a bunch of information about your question.
Title: wba jcm Post by: DNARGEL55 on April 06, 2012, 01:15:01 PM Would like some repair information on the UNI-SAN 15V300-PFC. Schematic and common repairs would be helpful.
Title: wba jcm Post by: stayouttadabunker on April 06, 2012, 01:19:07 PM It's a rather common ATX power supply box...
You can probably replace it with a regular computer PS. If you want to find some help on it, I found this thread...>>> http://forums.delphiforums.com/n/mb/discussionFrameset.asp?webtag=slottech&ctx=&cacheTag=5-5&msg=7197.1 (http://forums.delphiforums.com/n/mb/discussionFrameset.asp?webtag=slottech&ctx=&cacheTag=5-5&msg=7197.1) Title: Re: wba jcm Post by: nikstar on September 22, 2012, 04:52:32 AM Or, his machine needs cleaning and lubrication. In similar cases I just put some oily contact spray (other lubricant can work as well too), at the side gears of the BV and since then, they running perfect for about six months now.
They ware installed at Atronic machines and 80-90% they failed to initialize. |