New Life Games Tech Forums

having problems with my bill acceptor, runway lights on all the time, dont know why??? machine is an aus nsw mk 5 aristocrat golden pyramids when i unplug it msg on screen says bill acceptor fault. any help would be very appreciated. cheers scootergee.

anyone know what the wiring on the plug for power is, seems to be wrong, anyone got a diagram?  also could it be the battery in stacker? scootergee

What type of Bill Accepter? If it is a JCM you can find the manuals with wireing diagrams at http://www.jcmglobal.com/en/support/downloads/manuals.aspx
You can also find test procedures in the Appendix of the manuals

it says gpt on the back, been to that site, dont know if wiring diagrams are for the aristocrat? or they are generic?
have manuals for the gpt bill acceptor. cheers.

Sounds like bill acceptor needs reprograme.being a 5.2 then it needs the 24 vers so long sit is a nsw game.

And as well that is not a battery in the stacker. It is a ibutton and the stacker does not need it to operate

Can get BA's to suit if you want,
mk5 runs same programme as Konami's
mk6 is different.
Aprox $100.00 plus post.

if i pull the plug on the side off then put back on, the little red led on the side comes on and goes off. all the pins in the plug are loose and wont stay in the plastic casing. maybe they have come out and been put back in the wrong spot??? wiring diagram would be a massive help. :89-

This looks like a .5.1. Is the bill acceptor part of the door