|
Title: bally e-2000 hopper not working Post by: pindork1 on April 10, 2012, 04:09:24 AM well i picked up two machines the first one has me stumped so i have moved onto the second machine. all works but the hopper works intermittently. i pulled the i/o board out of the first machine and placed it in the second machine. the hopper works fine with the i/o board out of the first machine. i have looked at the schematics for the i/o board but i cant seem to find the transistor that turns the hopper on? is it a transistor or a chip? what turns the hopper on? or what should i look at on the i/o. thanks!!!
mike Title: Re: bally e-2000 hopper not working Post by: Amachanic on April 10, 2012, 05:54:24 PM :172-
Gary Title: Re: bally e-2000 hopper not working Post by: pindork1 on April 10, 2012, 06:30:49 PM thank you gary!! the trouble im having is i cant find what controls the hopper? the schematics in that e-mail has no listing for the hopper motor on the i/o board. thanks again for the help!! :99-
Title: Re: bally e-2000 hopper not working Post by: Amachanic on April 10, 2012, 08:36:13 PM If you have an E2000 there should be a small blue or clear relay mounted right behind the hoppers plug. If it was a 1000 series then there would be a relay board in the same place.
Title: Re: bally e-2000 hopper not working Post by: pindork1 on April 11, 2012, 12:03:20 AM i do see the hopper relay board. i have a tested i/o out of another game and the machine functions fine with that i/o board. i reflowed all the edge pins and the problem follows the i/o board. i cant seem to find anything on the i/o schematic that shows a path to the hopper? thanks again for the help!!
|