New Life Games Tech Forums

Hello All

I just got a 5 cent bally 1114 and have a couple of questions..

It is a high boy.

When i opened up the top i seen this in the pic below. I think it is a multiplyer but nut sure?

Not sure how it works. Never seen one in these before.

How do you set it?

It will pay out even when i dont hit anything to pay out???

couple of more pics

more pics

one more pic.

Nice machine.  Thanks for the pics.
The top unit holds your odds disc and your multipliers (X2 and X3)
They should only come in to play when you play more than one coin.
Give it a good go-through, and check all your switch contacts to make sure they all make and break.
Then we'll see if we can figure out any problems you have.

it is a 1114 balys. 1976
 
I cant get the bell to ring when i win. The coin dong works. and it has a multiplyer in the top that dont seam to be working, i cant get row 1 and 2 coin lights up on the top to work...
 
I can put coins in and pull handel and everything spins and stops.
it dose pay out...

I have oiled every thing up and used contact cleaner to clean all contacts.
 
Do you have any suggestions???

With the top glass out, check to see that your multiplier board steps up when you put 2 or more coins in it.
If not, you can manually push on the step up plunger of your odds disc, to see if that lights up your 2nd and 3rd coin lights, and to verify that it does indeed advance.
Also, try putting up a 7's pay or other large pay to see if that rings the bell.  Feel the bell clapper during that pay to see if you feel any vibration at all.  You may have to open up the clapper just a tad.
Also, see that all your switch contacts are making good contact, including the wiper fingers on the odds disc.  They should snap a little when you pull and release them.
Go through and check all your pays to see that they all work.

Ok..

I got the bell to work.

You where right it only works on wining 777... 

Is there a way yo change it ti work on every win????

On the multiplyer there was a bent copper arm on the real that wasnt making contact when it moved when you put a coin in.

Probably several ways to make the bell ring on all pays.
One involves running a line through all your reels.
Another involves running jumpers on your reel boards (probably more easy)
Yet another involves running a jumper to your payout relay.
And probably there is another easier way that I can't think of right now, which maybe someone else can pitch in on....?
Schematic would be nice.

Sounds great...

Thanks for all your help... :131-

It is all up and working right....

Just need to find some new reel strips now...

Thank you again..

The only place you might get lucky and find them would be at Foxsslots. They don't look that bad in the pics you have posted. He does have some available on line at his store.

There are a couple spots in each reel that are really bad...

Who ever put theses last ons on really did a poor and crimped them all over bent and it just donr look good.

I asked foxs slots.

Just waiting for a awnser back..

Does anyone know where I can get the get the glass for this type of slot machine?

What piece? There are three pieces. Top feature, reels, and belly glass..

The belly glass with payout and the reel glass.