|
Title: WBA 11 ss not working... Pictures Post by: motom67 on April 21, 2012, 01:09:29 PM I have new igt upright s+. The previous owner has never seen the validator work. The bv seems to get power but I see a 4 pin male clip that has now female pair. I've searched around the machine for awhile to find the connection with no luck. I think it's an easy fix.
Title: Re: WBA 11 ss not working... Pictures Post by: motom67 on April 21, 2012, 01:40:17 PM http://youtu.be/CI17mrGyVgw (http://youtu.be/CI17mrGyVgw)
Title: Re: WBA 11 ss not working... Pictures Post by: Mr. Dinoman on April 21, 2012, 01:44:55 PM Here is the wire diagram...Do you have a cash can installed?...You also may need the BV (Bill Validator) enable chip...
Title: Re: WBA 11 ss not working... Pictures Post by: motom67 on April 21, 2012, 01:55:24 PM I have a cash can. I took it out with the power on and the BV cycled. I don't know about WBA's. bv enable chips. I have other machines that Ive set up before. I have a set chip for the other S+ machines I have. I also see the dip switches and do not know which ones need to be flipped.
Title: Re: WBA 11 ss not working... Pictures Post by: Mr. Dinoman on April 21, 2012, 02:24:16 PM Cash can must be installed...Sounds like you need the BV chip...If you use a "Ram clear" chip, then you must use a BV enable chip to get the BV working again...
Title: Re: WBA 11 ss not working... Pictures Post by: motom67 on April 21, 2012, 03:47:30 PM Yes Thank You!!! That worked beautifully! :3- :244-
|