New Life Games Tech Forums

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games. => Topic started by: bhinkley on April 24, 2012, 07:18:00 PM



Title: question on mechanical timers for S2000
Post by: bhinkley on April 24, 2012, 07:18:00 PM
Does anyone know if the mechanical counters need to stay connected in an s2000?  I am wanting to disconnect them if possible for now, but don't want any issues if I do.


Title: Re: question on mechanical timers for S2000
Post by: Foster on April 24, 2012, 08:40:44 PM
Yes they can be disconnected but you have to put a jumper between the ground wire.
Black with stripe and the wire next to it in the connecter.
If you look closely at the board they are mounted on you will see there is jumper as a trace on the board.


Title: Re: question on mechanical timers for S2000
Post by: bhinkley on April 24, 2012, 09:00:22 PM
ok, so disconnect them and make a little jumper on each connector so that they think they are still connected basically?


Title: Re: question on mechanical timers for S2000
Post by: Foster on April 24, 2012, 09:22:47 PM
Only one jumper is needed
Between the black with stripe wire and the one right next to it in the 10 pin connector
Adding any more will most likely short 25V DC to ground (not a good Idea)

Look closer at the meters board and you will see a trace between pin 9 and 10.


Title: Re: question on mechanical timers for S2000
Post by: bhinkley on April 24, 2012, 09:29:23 PM
Ok.  I haven't checked the board yet.  I will look when I get the time to play around with it