New Life Games Tech Forums

Hi;
I"m new to the forum but was hoping that I could get a lead on a replacement HVT.

I am repairing a Tatung Model#VS20475T- Type 58 and are currently compiling a cap list for the chassis. I also noticed that there is a crack or two in the HVT but before I remove it, as it is currently working, if someone knew where I could find the replacement?

I checked with arcadecup and arcadeshop with no luck.

I did a search and found this:

http://www.mcmelectronics.com/product/HR80342&utm_medium=Affiliate&ref=cj&utm_campaign=CommissionJunction&utm_source=CommissionJunction (http://www.mcmelectronics.com/product/HR80342&utm_medium=Affiliate&ref=cj&utm_campaign=CommissionJunction&utm_source=CommissionJunction)

Looks very similar but I need to compare side by side, I don't have the chassis in front of me right now -  any opinions?

Any help would be appreciated. - (anybody have a link to the manual - cannot find that either!)

Thank you

Jeff

Also checked americangaming - no luck

You might try Andrews Electronics also

Hi;
Thank you for the suggestion.

I searched the site but could not find one, so I sent them an e-mail requesting pricing and availability.

I'll keep my fingers crossed.

Thank you again

Jeff

Ping Chad over at Arcadecup.com

There is more than one Type 58 monitor. I ordered a cap kit from Zanen for mine and it was quite different than what the monitor I had needed.

Hi;
I had checked with him and he does not have any HVTs' for my chassis.
I received a response from andrews and I have to call them personally to discuss my needs, they cannot do it via e-mail.
Thanks again
Jeff

Bad News....... I s/w the rep at Andrews Electronics and they do not have the replacement HVT...........

Would anyone have any suggestions as to where else to look for the replacement HVT?

Thanks
Jeff

BTW, here is the cap list I compiled for the monitor..... (attached)

Would anyone happen to have a set of schems available, I need to do some troubleshooting.......

Thanks
Jeff

I finished the cap kit on my Tatung VS20475T and added the 2 tant caps to the list.

I also found a typo, I incorrectly listed the 220uF 400v cap as C104 when in fact it is C103.

I have updated the attachment to reflect these changes...

Jeff