Title: S2000 Sound Problem Post by: sbsgroup on May 07, 2012, 06:34:14 PM I know this has been worked to death but I have a S2000 running S+ games and only get sound from one top speaker. I know it would not be stereo but I thought you could get sound out of all three even in mono mode. Any thoughts or ideas would be helpful.
Thanks Title: Re: S2000 Sound Problem Post by: reho33 on May 07, 2012, 06:40:24 PM Two options:
1) Splice the top box speaker wires together so that you get audio out of both speakers. 2) Get a MMII sound board, install, and use a DSV00042 SIMM, them set to legacy sounds to get sound out of both speakers. Title: Re: S2000 Sound Problem Post by: cowboygames on May 07, 2012, 07:54:50 PM Does he actually need the 42 simm? I was under the impression that simply having a multimedia card installed would give the stereo option, but I'm not home to confirm so I'm asking.
Title: Re: S2000 Sound Problem Post by: reho33 on May 07, 2012, 08:12:07 PM I don't know, I believe you need the simm
Title: Re: S2000 Sound Problem Post by: Foster on May 07, 2012, 09:39:13 PM You need the SIMM to enable the stereo option.
There is a mono version of the S2000 audio harness from top box connector to Amp. It splits the audio to the amp so all speakers will work. Also there are Vision harnesses that go from the top box connector to both speakers (in series) Title: Re: S2000 Sound Problem Post by: sbsgroup on May 07, 2012, 10:25:13 PM Any Idea what the mono version looks like?
Title: Re: S2000 Sound Problem Post by: Foster on May 08, 2012, 05:00:52 PM The mono harness from top box to amp splits the left or A channel into both input channels for the Amp.
in other words if you look at the connector that plugs into the left rear of the top box. There is 2 wires in the Channel A+ and 2 wires in the Channel A- connectors. white with a stripe (2) and green with stripe (2) the stripe color will be the same color. Title: Re: S2000 Sound Problem Post by: sbsgroup on May 16, 2012, 02:19:24 PM Any idea where to get the mono version of the speaker cable?
Thanks |