New Life Games Tech Forums

Does anyone have step by step setup for multi machine.  I have a odd machine dont know why it was setup this way on the touchpad it has  25, 50, 25. 1.00.  The two 25s are one right over the other.  I wondered if some had messed with it before.  I dont know why two 25 cent sets.  Anyway does anyone have step by step on setup.

Thanks in advance

I can't help with the programming, but I can assure you that what you've described is perfectly normal. The S2000 machines with the denomination touchpad can have up to four denominations set. It's possible to have just two denominations, or three (like yours), in which case they double up on a listing on the sticker. If the lights are working, both squares should light up when you select the denomination that is duplicated.

sbs,
Do you have proper Touch pad denom sticker to match the 4 denoms you wish to program?
If not, that will be worse than two .25 buttons.
At least the denoms match the sticker right now.

When you get the Touch Pad sticker with 4 denoms you want, basically what you'll need is the proper Keychip for your machine.
You'll probably be needing to change the machine's coin denom., accounting denom. and a few other things.
If you want to do some homework, type in "Touch Cell" in the search box
and read some of the previous threads on setting up a Touch Cell denom pad.
These topics have been covered many times before.
Here's one from about 3 years ago...>>>

http://newlifegames.net/nlg/index.php?topic=3406.0

Report back when you have the denom sticker you want to use
and what SB and SG (GME1 &2) chips you have installed.

And one more.

http://newlifegames.net/nlg/index.php?topic=3406.msg28455#msg28455 (http://newlifegames.net/nlg/index.php?topic=3406.msg28455#msg28455)

Ron (r273)

How would you set this one up,  is there a trick?  I am probably just missing something.  When I go into the setup it doesnt give me a choice of 25 cents more than once.

You do that part in the touch pad setup
the touch pad is numbered
1 2
3 4
set your player denoms like this denom 1 is $0.25, 2 is $0.50, 3 is $1.00.
so you assign player denom 1 to button 1 and 3, player denom 2 to  button 2, and player denom 3 to button 4
Depending on how it is currently configured you might have to configure the player denoms for button 2 and 4 then cycle back to player denom 1 then set player denom 1 for buttons 1 and 3

That makes sense,  I think I finally understand, I wonder why they set it with two 25 cent choices?

Many of the people that play quarters in casino's usually play quarter, half and dollars and rarely play anything higher.
The denom panel has 4 places they usually duplicate the lowest denom.
they also have touch pad denom labels with only 2 denoms as well.

Thanks,  that answers my question,  I was wondering why that would happen.

Above worked great,  took a little trial and error but worked great.

Thanks