|
Title: barcrest power supply Post by: kenokarz on February 02, 2009, 02:25:22 AM anybody got the pin out for the barcrest upper power supply, power supply says sanken power systems (uk) ltd
part # sps036L thanks Title: Re: barcrest power supply Post by: channelmaniac on February 02, 2009, 01:32:21 PM Turn it over and look at the bottom of the board.
Find the ground connection. From there you can see which caps are connected to ground via their "-" lead. Those are on the positive voltage outputs. The caps that have their "+" lead connected to ground are hooked to the negative voltage outputs. From there you can look at the voltage ratings on the caps and sometimes figure out which voltage outputs are which based on that. (The 36v output will probably have 50v caps on it while the other voltage outputs will have lower ratings) RJ Title: Re: barcrest power supply Post by: kenokarz on February 02, 2009, 01:50:40 PM ok thanks , i got manual with some stuff in it that could help
|