|
Title: Bally coin acceptor Post by: bikerbawb on May 20, 2012, 03:15:10 PM I have a Bally Game Maker. It was working fine when, for no apparent reason, it stopped registering coins. I also noticed the LED on the COD was not lit. I swapped out all the coin components with known good parts with no change. Can anyone offer any help? I'm stumped.
Title: Re: Bally coin acceptor Post by: Buzz on May 20, 2012, 05:23:25 PM I know very little about Game Makers, but i it's like a Bally 5500 and 6000 there will be a toggle switch on the front of the MPU tray, make sure it's in the UP position.
Title: Re: Bally coin acceptor Post by: bikerbawb on May 20, 2012, 05:26:18 PM Thanks for such a quick reply. I located the problem, a bad ground connection on the back plane. Now to get the bill validator to working.
|