|
Title: how to turn on Mei Cashflow SC series #42581572782 in a Bally Quick Pick Paytime Post by: tghost468 on May 25, 2012, 06:07:53 PM Having trouble turning on a Mei Cashflow SC serial# ,42581572782 in a Bally Quick Pick Paytime,did a complete safe ram clear to remove a 9.1.NC.And reset the dip switchs. When i power up it cycles and shows green light, but when i close the door it shows RED circle with a line through it insert coin light is flashing and there is 2 dots low in winner paid.The SMI 9466 Luxor SD85232A- 07/31/02.THANKS for taking to read this.You Techs are very helpful :137- Title: Mei Cashflow SC Series Post by: tghost468 on May 25, 2012, 06:41:39 PM I have a Bally Quick Pick Paytime SMI 9466 Luxor SD 85232A -07/31/02.It had a 9.1.NC.Code did a complete Safe Ram and reset dip switchs ,know when i power it up the Mei Cashflow cycles and green light is on but, when I close door a RED circle with a line through it shows up in front.Have not work on these much.I read alot on this site,how do i activate it. All of you Techs are a BIG HELP,to everyone.Thanks for taking the time to read this. Title: Re: Mei Cashflow SC Series Post by: slotsteve on May 25, 2012, 09:20:01 PM is bill can in right?
Title: Re: Mei Cashflow SC Series Post by: tghost468 on May 28, 2012, 06:45:32 PM Yes,it locks in place,ck all wires they look good,what else could try. :103-
Title: Re: Mei Cashflow SC Series Post by: turniphead on June 03, 2012, 04:40:35 PM was it working before the safe ram? if so i would suspect a machine setting that got missed?
|