|
Title: Aristocrat MarkV Won't recognize the SPC firmware Post by: Diver on May 30, 2012, 04:49:17 PM I have key chipped this puppy about 15 times and it still doesn't see the firmware. Where it shows on the "SPC Config Screen"
H/W Rev: Firmware ID: Firmware Ver: Firmware Name: Floor Location: All **** in these areas. I made sure I cleared static RAM What did I miss? : :103- I'm fairly new at this. Thanks Title: Re: Aristocrat MarkV Won't recognize the SPC firmware Post by: turniphead on June 03, 2012, 04:44:21 PM did you set the address as "1" ?
Title: Re: Aristocrat MarkV Won't recognize the SPC firmware Post by: Diver on June 03, 2012, 07:34:58 PM Yes,
I did set the address as 1. I might not have set the serial# though. I was wondering if that might be it? Title: Re: Aristocrat MarkV Won't recognize the SPC firmware Post by: TZtech on June 03, 2012, 07:59:10 PM Whats the status LED on the SPC flashing ? Did You check wiring from backplane to SPC. Maybe try a SPC clear?
Title: Re: Aristocrat MarkV Won't recognize the SPC firmware Post by: Diver on June 04, 2012, 12:42:32 PM The LED on the SPC was flashing every 1 - 1.5 sceonds.
I exchanged the wiring harnesses with a "known" working machine, with no change in either. and I've cleared the SPC(# 6 & 7 )several times. & cleared static RAM. I'm guessing I've keychipped this machine probably 12 -15 times. |