New Life Games Tech Forums

ok i think this is a s5500 if not here is the info on the plate

Ser# s950201434
model s63m3wr10
mfg 9/95
7074/fbf-500

wanted to know what the dip switches settings are?

also what series this is s5500???

thank you in advance

anyone on this forum? that can help i had other forums refer this forum??

A 1995 machine should be a s6000.

can you post a picture of it or better yet the MPU board.

here are the pictures also can you tell me what the dip switches settings are? or if i can change them? i posted a picture of them also

(http://i547.photobucket.com/albums/hh479/dpickl01/photo1-2.jpg)
(http://i547.photobucket.com/albums/hh479/dpickl01/photo3-1.jpg)
(http://i547.photobucket.com/albums/hh479/dpickl01/photo4.jpg)

Duh!! wrong century. 1995 not 2005  :47- :47- :47- :47-

that is a s5500

Check your mail and I think that should answer all your questions

And thank you for serving !! :131- :131- :137- :137-

rock on Thank you

my top and bottom fl light are intermediately working? any help on that i replaced them with new but sometimes thell work and other times they wont wires look good

Replace the starters, little tin can looking things in belly door

Make sure you have the power turned off FIRST before removing those.  They can pack quite a punch.   :50- :50- :50-

great their all working now Thank you, new issue

when credits hit 775, 780 the hopper starts to pay out, it only pays what is hit on the reels . I thought it was not supposed to do this until 1000+
Q. can i change it to 1000,

I'm guessing your hopper limit is probably set to 800 coins instead of 1,000, so any win that would push the credit meter over 800 (say, winning 30 credits when there are 775 on the meter) is getting paid out of the hopper to prevent your credits from exceeding 800.

I'm sure there's a way to set the hopper to whatever limit you want (1,000, 5,000, whatever), but I'm not terribly familiar with your specific machine.  Do you have the manual for it?  If not, it looks like it's available for a free download from the Rudy's Deals website (http://rudysdeals.com/index.php?route=product/category&path=54 (http://rudysdeals.com/index.php?route=product/category&path=54) ) -- look for the Bally ProSlot5500 manual.  The manual should explain how to change the hopper limit setting on your machine.

I sent him the manual, The hopper max pay can be set in the options. In the beginning of the manual is a whole section on setting the options, read thru it and decide what you want each to be. Then open the door and press the test button till you see 10d on the display and advance thru and change each option to where you want it to be. Pretty easy to do if you read a little about it first.

ok hope i done mess it up