New Life Games Tech Forums

Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff => Pinball Games => Topic started by: poof on June 18, 2012, 10:31:15 PM



Title: bally 1974 amigo
Post by: poof on June 18, 2012, 10:31:15 PM
I have this machine and it works, but has some issues.  I had to clip the wire to the bonus servo as it was stuck on and heating up, same with a servo for one of the bells.  The game plays fine but would like to fix some issues.  Player 2 makes a loud buzzing sound, untill next player is up.

Thanks


Title: Re: bally 1974 amigo
Post by: BR549 Auto Sales on June 19, 2012, 01:28:14 AM
you need to clean and adjust the switch banks associated with the solonoids that are affected, probably would not hurt to check the coil stops and make sure the coil sleeves are not melted (if plastic). Also check to see if you can manually engage the coils that you are having trouble with by hand. If those coils were stuck for a long period of time, they may need to be replaced as well which should run anywhere from 8.00 to 15.00 each. Hope this gives you a starting point, good luck.