|
Title: S2000 Buttons Not Working Post by: Slots_007 on June 21, 2012, 12:25:12 AM OK, So I'm in the process of converting a 5 reel S2000 to a 3 reel Red, White, & Blue and have run into a problem. I replaced the front button panel with a panel from a 3 reel game, also replaced the buttons/button harness with S2000 buttons/button harness...Everything appears to be connected properly but the buttons do not function.
The machine has no reels in it yet so the machine shows "Reels Disconnected/Call Attendant" message, but everything else is complete inside so I decided to see if I can access the service menu...I can access the service menu but the front panel buttons aren't working and I can't select any menu options since the buttons aren't working. Am I missing something? Do I need to change something besides the front button panel, buttons and button harness? The part the harness connects to (unsure of the proper technical term) is original from the 5 reel game, I'm referring to the metal "wall" ( :47-) inside the lower portion of the machines door (INSIDE THE GAME)..... Would a clear make any difference? Could something be faulty? Or did I screw something up bad this time? :25- Title: Re: S2000 Buttons Not Working Post by: cowboygames on June 21, 2012, 12:44:02 AM Did you change the door IO cards? The 5 teel uses a twin 7802 IO vard config and the 3 reel probably needs the single 7801 IO card config
Title: Re: S2000 Buttons Not Working Post by: mah on June 21, 2012, 12:50:54 AM I had a similar problem with a 3 reel (no conversion) and went through the trouble of switching out the entire button harness with a known working one. Same problem. Buttons would not work.
Turned out to be a bad Display panel. When the harness going to the coin in / credit display was disconnected, all of the buttons lite up. Good luck. Title: Re: S2000 Buttons Not Working Post by: Slots_007 on June 21, 2012, 12:58:17 AM Did you change the door IO cards? The 5 teel uses a twin 7802 IO vard config and the 3 reel probably needs the single 7801 IO card config Darn! I thing your right! I never changed the IO cards! That would make perfect sense since I never swapped them...Oops!!! I'll try and get one and let everyone know if it works :) Thanks! I had a similar problem with a 3 reel (no conversion) and went through the trouble of switching out the entire button harness with a known working one. Same problem. Buttons would not work. Turned out to be a bad Display panel. When the harness going to the coin in / credit display was disconnected, all of the buttons lite up. Good luck. I already tried that, no joy :( Thanks for the suggestion! :) Title: Re: S2000 Buttons Not Working Post by: cowboygames on June 21, 2012, 01:32:52 AM It's usually the littil things that bite us in the ass, but it's not always dogs and midgets
|