|
Title: Bally s5500 Post by: OHMVIR on June 21, 2012, 11:38:28 PM Hi everyone.
I have a Bally s5500 roaring 20s slot that has an 81 error. I ordered the battery last week but I am a little worried about soldering it in. Is it possible to just clip off the old battery leaving its leads and use insulated alligator clips to attach the new battery's leads to them? Thanks! Title: Re: Bally s5500 Post by: a69mopar on June 21, 2012, 11:41:57 PM you can try. worst case is that the connection would be lost and you would have to clear and set up again. You can also solder the new battery leads to the old leads.
Thanks, Wayne Title: Re: Bally s5500 Post by: OHMVIR on June 21, 2012, 11:44:48 PM Thanks Wayne! ... Maybe soldering leads together would be a good option. Less chance of me messing up the board!
Title: Re: Bally s5500 Post by: BR549 Auto Sales on June 22, 2012, 02:07:03 AM worst case, take it to a Batteries Plus location, they usually have a tech with a soldering station that will do it for you.
Title: Re: Bally s5500 Post by: OHMVIR on June 23, 2012, 12:00:03 AM I didn't know that about Batteries Plus thanks for the info!
Title: Re: Bally s5500 Post by: OHMVIR on June 26, 2012, 08:20:54 PM Ok well I put the new battery in and have an 83F error now (usual from other posts I read) but the jumper trick did not work and one of the chips has 9600 i believe. So the question is where can I get the chips need to clear?
Thanks! Title: Re: Bally s5500 Post by: OHMVIR on June 26, 2012, 11:22:19 PM Thanks for the PMs everyone! You guys ROCK!
:3- :131- :3- Title: Re: Bally s5500 Post by: OHMVIR on July 02, 2012, 09:00:49 PM Just wanted to thank everyone again. My clear chips came in and my machine is working!
Title: Re: Bally s5500 Post by: OHMVIR on July 02, 2012, 09:15:12 PM :3-
Title: Re: Bally s5500 Post by: a69mopar on July 02, 2012, 09:44:57 PM Thanks for letting us know. Glad to hear you got it working again.
W |