|
Title: Converting from non-backlit to backlit Post by: laneman on June 22, 2012, 05:07:08 PM I converted a 5 reel S2000 from non-backlit to backlit and have no backlit lights.Works fine besides that.
I attached the connections.This harness is different from the one thats in my other 5 reel S2000. (http://pic20.picturetrail.com/VOL1230/4328480/9119547/403143976.jpg) Title: Re: Converting from non-backlit to backlit Post by: CVslots on June 22, 2012, 05:43:41 PM Im no expert, by any means, but dont you have to change the i/o board and the reel control board as well? I know the 3 and 5 reel boards are different. 3 reel has 2 white molex plugs at one end, the 5 reel has a black and a white....
-Roslyn Title: Re: Converting from non-backlit to backlit Post by: idesign on June 22, 2012, 06:54:10 PM See that 6 pin white molex connector in the upper left corner. That is your power connector. You need to connect power to the board in order for it to light up.
Title: Re: Converting from non-backlit to backlit Post by: laneman on June 22, 2012, 07:00:45 PM Did that already,but thanks.
(http://pic20.picturetrail.com/VOL1230/4328480/9119547/403144897.jpg) Getting a flashing yellow LED on the controller board. Title: Re: Converting from non-backlit to backlit Post by: CVslots on June 22, 2012, 09:10:09 PM Here...this post may help.
http://newlifegames.net/nlg/index.php?topic=12825.msg110617#msg110617 (http://newlifegames.net/nlg/index.php?topic=12825.msg110617#msg110617) Title: Re: Converting from non-backlit to backlit Post by: laneman on June 22, 2012, 10:30:34 PM I figured it out...
I have two 5 reel S2000's so I started swapping parts with the working one.Swapped the controller ect.When I swapped the working machine's harness with the non working one,it started working.I have two harnesses with different connectors. Heres the non working one.... (http://pic20.picturetrail.com/VOL1230/4328480/9119547/403146746.jpg) One that works... (http://pic20.picturetrail.com/VOL1230/4328480/9119547/403146757.jpg) The ends shown connect to the controller board. Title: Re: Converting from non-backlit to backlit Post by: cowboygames on June 22, 2012, 10:42:04 PM Your harness with the black plug is for LED backlit reels and the one with all white is for incandescent. Not interchangeable
Title: Re: Converting from non-backlit to backlit Post by: laneman on June 22, 2012, 10:48:08 PM Thanks for the reply.That explains why it wasn't working.
|