New Life Games Tech Forums

Progressive Controllers, Displays and Slot Toppers => IGT Spectrum Progressive Systems. => Topic started by: Magicslots on June 25, 2012, 06:33:59 PM



Title: Looking for a manual for a netplex progressive display
Post by: Magicslots on June 25, 2012, 06:33:59 PM
Looking for the manual/etc for a netplex progressive.  I have it powered up, but I am looking for how to set the increments, etc, I know its
dependent on the base chip (Triple Lucky Sevens 3 reel)  but this is the way it came from the casino.  The amount is at zero and not climbing..? :103-
Key chip?  Didnt really let me in to set the numbers..  am I missing something?


Title: Re: Looking for a manual for a netplex progressive display
Post by: cowboygames on June 25, 2012, 08:22:51 PM
Have you gone into menu 7.3 and set the progressive type? I did one of these on a mutidenom abput a year ago and ot was a pain in the....arm


Title: Re: Looking for a manual for a netplex progressive display
Post by: staz on June 25, 2012, 08:47:17 PM
key chip your machine
then go to progressive
then go to stand alone setup 7.3.3
then go to levil 1
set limit  amount---- i suggest 9,999,999
then set base amount ----- to whatever you want it to start at....
then set add percentage----- i use 05.000%


after that you should be good...... if the machine is multi denom you will have to go to each denom and enable level 1 stand alone so the progressive shows up on each denom......


Title: Re: Looking for a manual for a netplex progressive display
Post by: Foster on June 26, 2012, 04:46:51 AM
In 7.3.1 you have to set progressive for each denom to standalone, then in 7.3.3 you can configure
Base amount
Current Amount
maximum Amount
Increment as a percentage of the wager