|
Title: fuse sizes Post by: yabyab on June 27, 2012, 09:24:52 PM Hi hoping for some information
Just got this machine up and running after reading threw a few post on here only new to this not very electrically mined. One concern i have is what amp fuses should i have in it at the moment it is loaded with 25 & 16amp fuses that i have been told by a friend they are to big? and any other information on this machine would be greatly appreciated.Loving this hooked know Title: Re: fuse sizes Post by: knagl on June 27, 2012, 10:01:09 PM Do you have any information about a manufacturer or a model name or number (maybe a plate on the side or back of the machine)? I'm pretty sure it's not an IGT S or S+, but I sure don't know what it is, either.
Title: Re: fuse sizes Post by: yabyab on June 27, 2012, 10:10:30 PM it a IGT unfortunately the plate has been remove i think its a Australian machine
Title: Re: fuse sizes Post by: jasongd on July 17, 2012, 09:09:19 AM You use 4 Amp fuses on all 4 fuse ports .
From your pic of the fuse section reading left to right ( F1 , F2 , F3 , F4) Cheers. Jas. Title: Re: fuse sizes Post by: yabyab on July 17, 2012, 09:21:05 AM Thanks for that
|