|
Title: V-SYNC problem on Toshiba 510 UEB 22 with SANWA PM1723C Post by: realpingo on July 02, 2012, 05:53:33 PM I have a JAMMA-cabinette with a Toshiba 510 UEB 22 monitor and a SANWA Electronics PM1723C PCB.
Colors and H-sync is PERFECT. I run mame through a PC with J-Pac and Arcade VGA. The Sanwa-PCB had a cap-kit installed about 3-4 years ago. Still looks great. I replaced the HA11235-sync chip the other day. However, the V-SYNC NEVER LOCKS! It rolls, slowly, but whenever you think it will lock it switches direction and rolls, slowly, the other way. :( Just resoldered the V-Sync Hold Pot - felt a bit loose, but no effect. Still rolling. Anyone have any good idea on how to solve this problem? |