|
Title: WMS 40X lobatt Post by: pinballpaul on July 05, 2012, 06:22:32 PM I have a WMS 40X machine that I am getting a lobatt error code on. That battery measured 3.1v. I went ahead and removed the battery holder and replaced it with a soldered in battery and I still can't get rid of the lobatt message. Do I need a reset prom to clear this?
Title: Re: WMS 40X lobatt Post by: dale on July 05, 2012, 08:10:04 PM According to the manual you have to use a clear chip to restore data whenever you change batteries.
Title: Re: WMS 40X lobatt Post by: kenokarz on July 05, 2012, 10:18:35 PM You must have the right denom clear chip for it, wms 400 used a different clear chip for each denom , 5, 10, 25, and 1.00
Title: Re: WMS 40X lobatt Post by: pinballpaul on August 28, 2012, 06:40:05 PM Which chip is the cmos ram and where does the power come in? I'm still getting loBatt error.
|