|
Title: S2000 SAS Primary Channel 3 is missing Post by: buzzarama on July 07, 2012, 01:56:11 AM Ok, I am completely lost here, hoping for a little insight.
I just initiated par resets and asset changes on 5 S2000 machines today which require a ram clear per compliance. I used clear IVC000224 to clear ram and then keychip 45 to setup. Once I got everything setup, I realized I no longer had a primary sas channel 3 to set them to, I only have OFF 1, 2. From what I understand the S2000's won't communicate on any channel except 3. WHAT DO I DO NOW? Please help if you can. Thank you, Buzzarama Title: Re: S2000 SAS Primary Channel 3 is missing Post by: Foster on July 07, 2012, 03:02:38 AM How are the machines connected to the host?
Channel 3 is J82 on the Communications board. Channel 2 is DCS port on the motherboard or Fiber Optic port on comm board from my understanding. if you are are sure that you use channel 3 then you need to change bally miser off or another channel before trying to use channel 3 for SAS Title: Re: S2000 SAS Primary Channel 3 is missing Post by: buzzarama on July 07, 2012, 03:25:40 AM They are connected via J82, rs232. I have like machines that were not changed and they are all on channel 3. I will know for sure in the morning but I'm sure I turned miser off.
Thank you for the prompt reply Foster Buzzarama Title: Re: S2000 SAS Primary Channel 3 is missing Post by: harp on July 07, 2012, 07:58:49 AM Foster is correct in what he is saying, after a RAM Clear IGT's default Bally Miser to Channel 3, change this to Off and it will free up 3 for IGT use
Harp Title: Re: S2000 SAS Primary Channel 3 is missing Post by: buzzarama on July 08, 2012, 04:07:29 PM Whew, the excellent minds at NLG saved my bacon again. These were the first S2000's I have ram cleared, I don't have to mess with Bally Miser on my AVP's after ram clear. NOW I KNOW :279-
Thank you guys for your help (and for such fast responses) Buzzarama |