|
Title: Bally 5500 Blazing RESET questions/ problems Post by: retsof1949 on July 09, 2012, 03:22:01 AM My 5500 Blazing RESET light stays lighted. Can anyone help me? How do it get it to reset and stay dark? Some brief history. I am new to this...... I had a code 81, so I had the battery replaced...... then I got the code 83...... which meant I needed to do a ram clear...... so, I bought those 5500 clear chips for UL12 and UL15 and followed the complete clear procedure from the manual (pg. 2-11). I never got the CH C or CL C message in the win window and my reset button stays lighted. I turned the power off, pressed the reset button once I powered up again and nothing. Also, tried holding the reset button and then powering up and still nothing.
I need help, please!! :99- Title: Re: Bally 5500 Blazing RESET questions/ problems Post by: Blueslots on July 09, 2012, 07:10:10 AM Hi did u jump the jumper u need to Jp to clear its close to the batt
Title: Re: Bally 5500 Blazing RESET questions/ problems Post by: retsof1949 on July 09, 2012, 03:21:13 PM Thanks Blueslots..... I'll try that. How do I do that? (I'm new to this).
Title: Re: Bally 5500 Blazing RESET questions/ problems Post by: retsof1949 on July 10, 2012, 08:11:19 PM @Blueslots or anyone else who can help, I checked the JW12 switch near the battery and it is in place on both prongs. Is that the way it should be? Again, I have the manual, but it really doesn't say anything about that. The RESET light still stays lit.
Also, on JW10 I have a little tag on that black rectangular plug that says "Ram Clear". It is on only one of the two prongs (the left one, as you face it). Do I need to do anything with this? I have the RamClear chips in the MPU. Bottom line, RESET is still red and I'm not sure what to do or try next. BTW, Anybody know of a repair tech in the Portland, OR area who take a look and help me? A few Photos attached to help see more detail of what I am dealing with. |