New Life Games Tech Forums

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games. => Topic started by: rickaaaer on July 13, 2012, 05:13:20 PM



Title: Door Optics
Post by: rickaaaer on July 13, 2012, 05:13:20 PM
Ok I have been putting this s2000 Double Diamond 5 linner back together an I'm getting close to being done I think. Went through the setup process and got to the part where it says to close the main door. When I do this nothing happens. I don't know if the optics are lining up or not. I can see it once I close the door.I would like to test the door optics ,but i don't know how. Could someone help be through this process.
What should the voltage be on the red and green wire that hooks up to the optics on the door.  Thanks Rick


Title: Re: Door Optics
Post by: rjpohl on July 13, 2012, 06:50:10 PM
to check optics I put a mark on both the door where optics are located.  Open door and make sure lever is in bottom of slot, mark location on door.  Mark location of cabinet optic on cabinet.  Shut door and lower latch.  Now your marks need to align.   Adjust as needed.

Bob


Title: Re: Door Optics
Post by: rickaaaer on July 13, 2012, 06:56:08 PM
thanks I will give that I try when I get home tonight.


Title: Re: Door Optics
Post by: rickaaaer on July 14, 2012, 04:39:41 AM
I found the problem. The belly door switch was not  closing. Now I'm getting a coin in jam and closure  m error message


Title: Re: Door Optics
Post by: rjpohl on July 14, 2012, 10:02:22 AM
"Closure m" is ok, that means main door is closed.
Do you have coin handling (hopper, coin comparator) on this slot? 


Title: Re: Door Optics
Post by: rickaaaer on July 14, 2012, 02:49:12 PM
Yes. I have a coin hopper and a coin comp. ,but I don't know if the coin comp. is good


Title: Re: Door Optics
Post by: rjpohl on July 14, 2012, 02:55:29 PM
Is the green light light on coin comparator?
Check to make sure door i/o board is seated.
I also believe I've had bad CPU boards casuse this coin in jam error.
Do you have another machine you could swap parts with?


Title: Re: Door Optics
Post by: rickaaaer on July 14, 2012, 03:00:33 PM
No I wish I had another machine . But I do have more mpus I could try


Title: Re: Door Optics
Post by: Buzz on July 14, 2012, 03:27:39 PM
Open and close the main door latch 4 or 5 times.


Title: Re: Door Optics
Post by: rickaaaer on July 14, 2012, 04:14:33 PM
When I get home I will give that a try Buzz


Title: Re: Door Optics
Post by: rickaaaer on July 15, 2012, 03:38:59 AM
Buzz that did not work. The green light is not light. I'm not sure the coin comp is any good. So I have one ordered. I will see if that helps.