|
Title: 61 code and 99-5 code to S+ Post by: easternpinman on July 17, 2012, 08:20:32 AM I have two issues on S+ machines "Black Widow " first seems to be the 61 loop can not clear that after the cmos bat failure / replacement
tried to swap with a 1271 this is a 1213 and reset ,but does not work !!!!!!!! grrrrrrrrrrrrrrr and of course used the method with test switch and jackpot key It seems I need the clear chip Edited to comply with TOS http://www.youtube.com/watch?v=3NHuAUKa2M8&feature=youtu.be (http://www.youtube.com/watch?v=3NHuAUKa2M8&feature=youtu.be) On another machine " Triple Bonanza " I got the 99-5 code if I am quick after power on I can insert a coin and run a play but after that goes immediate to 99-5 code hardware error grrrrrrrrrrrrrr again,,,,,,,,, video here : http://www.youtube.com/watch?v=1QpziifqAN4&feature=youtu.be (http://www.youtube.com/watch?v=1QpziifqAN4&feature=youtu.be) 99 5 does not clear with open and close door Title: Re: 61 code and 99-5 code to S+ Post by: Jim on July 17, 2012, 01:47:52 PM on your first issue, you will need a clear chip and a set chip. you will have to purchase these from the vendors located on the home page. Jim at Blueridge Slots is a great source for these.
on the second issue, 99-5 that is a bill acceptor hardware failure. unplug the plug for the power supply of the bill acceptor, this should take it out of the loop and disable it and allow the game to be played using coins only. then you will have to troubleshoot the bill acceptor. only the transport, head, cash can, power supply or harness could be your problem. you could sub with parts from the other machine to find problem. hope this helps Jim |