|
Title: Gaming machines don't display meters Post by: futkorn on July 21, 2012, 11:35:07 AM Good day for all,
I have gaming machines with SP1049 and it works very well. I need a SAS version better than 3.06 and, therefore, I changed SP1049 by SP1213 with SET111. I configured machines with necessary parameters to my project. 24 machines work well, but 2 don't display meters when I turn reset jackpot key. Reset jackpot key is good because works well before and when I configured machine, for example with SET111 setting in 2 for IGT SAS protocol. How I can resolve this? How I can see meters? Thanks for attention. Title: Re: Gaming machines don't display meters Post by: poppo on July 21, 2012, 12:15:13 PM It seems like it should just work regardless of any settings. However the PSR mentions something about meter readings disabled if it's in tournament mode.
Title: Re: Gaming machines don't display meters Post by: futkorn on July 21, 2012, 12:37:34 PM It seems like it should just work regardless of any settings. However the PSR mentions something about meter readings disabled if it's in tournament mode. All the machines are configured in the same manner, and just 2 don't show meters like coin in, coin out, jackpot, etc. Thanks for response |