New Life Games Tech Forums

This is a close up of the connector that is on the glass for the Diamonds and Devils game glass.

Does anyone know what this is or where it would plug into ? 

It is 20 pins

It's unfortunate that it didn't come with the cable.  It would have made it easier.  I'll take a look through my literature but don't remember this one.

Thanks,
Wayne

Wayne on a 6000 is there a 20 pin connector on the motherboard?

Yes, the bill validator and the feature lamps as shown.

W

It couldn't hook up to that ? Right?
'

Do those chips shed any light on this?

My wife has me working on something else, When she leaves the room I post.  Here is a similar top box board.  Please take some pics of yours, not just the connector, hopefully clear enough to see.  We'll dig a little more before you start plugging in wires, don't want to blow anything..  The 9 pin top box plug is likely the connection.  Please be patient, I know how it is with a new toy though........

Thanks,
Wayne

OK Wayne I think you are correct with the feature lights - Here are three pictures and from the back the board looks just like the your diagram.

One more picture.


I don't think the 5500 has a feature light connector

I dont know a whole lot about these but my guess is that that display has to be connected to some other small board, then in turn, from there - connected into the machines' top box wiring.
Someone , somewhere must have a picture of it completely hooked up and wired.
I hope they make a post here to help ya.

Can I ask, how many wires are actually in that top box molex connector...or , how many male/female pins are inside of the molex itself?

The connector on the top glass has 20 pins