|
Title: BB 1 Video Configuration (problem solved) Post by: cp on July 25, 2012, 12:17:43 PM Started with a working BB1 Video slot. Needed to clear it. Did a successful Ram Clr. Machine, after several minutes, is in the Configuration in Progress mode.... CALL ATTENDANT in rectangular screen... shows in the screen. Usually, this rectangular screen would show Denom not set, Game not set etc. etc. Doors are OPEN. When I press the config / test button the Setup menu flashes on screen for 1 second...and disappears. Changed this button/ switch...no effect. (if I use the Key Sw, I just get the minimal Sound and TS menu) no setup. I've pulled and re-seated the CPU.. did a couple more clears. Tried another known working OPER.Sys and Game.
Any ideas here ????? Thanks. PROBLEM SOLVED. Title: Re: BB 1 Video Configuration (problem solved) Post by: jdkmunch on August 22, 2012, 10:22:17 PM I'm glad you found the solution .... what was it?
Title: Re: BB 1 Video Configuration (problem solved) Post by: cp on September 05, 2012, 10:40:19 PM The problem was..... the lower door switch on cabinet was stuck "closed " .
Simply: bad door switch. |