|
Title: Key 17 options sheet Post by: rickaaaer on July 29, 2012, 05:03:09 PM Could someone tell me where to find a options sheet for a key 17 chip.
Thanks Rick.I'm almost done with the this Double Diamond 5 liner machine. This has been quite the learning experience. Title: Re: Key 17 options sheet Post by: leapyearguy on July 29, 2012, 05:28:25 PM the options depend on the game chip set (sg chips) then let me know what they are and I'll try and get you a psr (program summary report) this will lead you through it
Title: Re: Key 17 options sheet Post by: rickaaaer on July 29, 2012, 05:35:40 PM I will get the numbers off the sg chips and send them to you. Thanks
Title: Re: Key 17 options sheet Post by: rickaaaer on July 29, 2012, 06:55:39 PM Ok the SG # is 000363 1of 1 and 1 of 2.Now I ran the key 17 once ,but did not do it right. Do I have to put the clear97 chip back in again before I use the key 17 chip.
Title: Re: Key 17 options sheet Post by: leapyearguy on July 29, 2012, 07:05:14 PM nope, just re-key it
Title: Re: Key 17 options sheet Post by: rickaaaer on July 29, 2012, 07:08:03 PM Thanks
Title: Re: Key 17 options sheet Post by: rickaaaer on July 29, 2012, 07:25:02 PM Got the pdf you sent. It said something about a key 31 an I have a key 17. Does it make a difference.
Title: Re: Key 17 options sheet Post by: Buzz on July 29, 2012, 07:51:47 PM Rick Looking at my notes I sent you a key 31. I know it wasn't a 17 because I don't use it.
Title: Re: Key 17 options sheet Post by: leapyearguy on July 29, 2012, 07:56:31 PM key 17 is what I've been using
Title: Re: Key 17 options sheet Post by: rickaaaer on July 29, 2012, 08:30:50 PM Ok thanks. I'm having trouble understanding this key chip setup
Title: Re: Key 17 options sheet Post by: rickaaaer on July 29, 2012, 08:48:48 PM I did not see a slant top or upright option
Title: Re: Key 17 options sheet Post by: leapyearguy on July 29, 2012, 09:19:12 PM 7.1.6
Title: Re: Key 17 options sheet Post by: rickaaaer on July 30, 2012, 12:05:07 AM How do I get to 7.1.6
Title: Re: Key 17 options sheet Post by: leapyearguy on July 30, 2012, 01:09:22 AM push the white button on the board. It will go to 1 (accounting). press the change or bet 1 to change the modes to 7. press the spin to go into 7. Press the spin again and you will be at 7.1. press the change until it reads 7.1.6. press the spin and you will be there. change the mode to upright or slant with the change button. you are done with that. press the bet max several times to exit. You may have to key chip it to change that option.
Title: Re: Key 17 options sheet Post by: rickaaaer on July 30, 2012, 06:10:58 PM Yea!!!!!!! Got this s2000 double diamond working. Now I need to figure out how to activate the bill validator .
Title: Re: Key 17 options sheet Post by: leapyearguy on July 30, 2012, 07:30:12 PM Yea!!!!!!! Got this s2000 double diamond working. Now I need to figure out how to activate the bill validator . 3.3.1 Enable/Disable Determines whether the bill/voucher acceptor is enabled or disabled |