|
Title: S2000 bill validator Post by: rickaaaer on August 01, 2012, 04:16:18 PM My bill validator has a red,white and black wire. I would like to know.what they are uses for and there importance .I'm posting a photo of the wires I'm talking about
Title: Re: S2000 bill validator Post by: Buzz on August 01, 2012, 05:12:37 PM Rick why would you ask ?? If your talking about a WBA there are 4 plugs coming out of the BV only 3 of them are used. The only three wire plug coming from the BV is the one not used.
Title: Re: S2000 bill validator Post by: rickaaaer on August 01, 2012, 05:20:31 PM The BV has a white connector on it. Not sure how many wires there are and then there is a cable with 3 wires red . White and black . I ask because the bill Val is not working. I thought the wires might be the reason
Title: Re: S2000 bill validator Post by: Buzz on August 01, 2012, 05:59:40 PM This is the loom that goes from the BV to the machine with a WBA BV. Are you sure you have a WBA ?? Like I said only 3 of the plugs are used. The top plug in the picture is the one that isn't used. But the colors are ( it's hard to tell with my old eyes ) my guess is dark blue/ purple/dark green.
Mabe you should just tell ue what the BV is doing or in this case not doing. Title: Re: S2000 bill validator Post by: rickaaaer on August 01, 2012, 06:17:21 PM No I'm not sure at all. My bv only has one connector on it. The connector that plugs into the BV has 3 different jacks on the other end that look something like your picture. I have posted a photo of the wires I'm talking about in my first thread an I will post it here also. You ask what it was doing. Well the light on the front of The BV does not come on. It will take bills but spits them back out. I don't know if the BV is even any good. It came with the machine that was parted out. If it will help here is a photo of BV serial # and data info.
Title: Re: S2000 bill validator Post by: Buzz on August 01, 2012, 07:13:58 PM You see there were talking apples and oranges. Yuo don't have a WBA and I can't help you.Yours is a Mars and I don't know anything about them.
Title: Re: S2000 bill validator Post by: monitorman on August 02, 2012, 01:03:29 AM The mars ZT1202 is a IGT bv. Was this in your game and did it work before. If it was a working unit the rollers look dirt so you might need to clean it. The wires you were looking at first are (cash box removed wires) not used in S2000.
Title: Re: S2000 bill validator Post by: Jim on August 02, 2012, 01:20:25 AM the ZT1202 is a MARS bill acceptor. that model has been discontinued there should be a plug that comes from the unit you have pictured, the back of the ZT transport should have the counter part of that plug. meaning one is male and the other female, the plug that comes off the housing mates to a square plug that terminates to the four plugs to adapt to the S-2000.
the plcc chip to upgrade to the new money is hard to find. I would strongly recommend converting to a WBA bill acceptor. you can use the metal housing that is in the machine, you will have to purchase a transport housing complete with wiring harness, and a WBA transport and head and duck bill programmed with the IDO-024 and latest new money program. you will also need a cash can. Hope this helps Jim Title: Re: S2000 bill validator Post by: monitorman on August 02, 2012, 02:42:42 AM Wht put a WBA in when support ends at the end of the year. I would put in a Mars SC66-02
Title: Re: S2000 bill validator Post by: rickaaaer on August 03, 2012, 04:02:29 AM The mars ZT1202 is a IGT bv. Was this in your game and did it work before. If it was a working unit the rollers look dirt so you might need to clean it. The wires you were looking at first are (cash box removed wires) not used in S2000. it has never worked. This machine was parted an I got it working. Ive check the configuration think its right. How do I witch to a WbmTitle: Re: S2000 bill validator Post by: Foster on August 03, 2012, 04:30:15 AM How hard was it for you to get the current BV out.
its about that hard to put a WBA in and get it connected to the machine. The only other hard part is getting the machine to recognize the new BV and configure it but it will do most of that when you turn the power back on. I would go for a WBA-13 but realize as soon a new bill the newest 100 (even though it is not released yet) is supported in the latest software the wba-13 Now if they release another new bill you I and many others will be looking for a different BV that will support that bill I will stick with JCM for now unless some one can say another brand beats them and can back it up. Title: Re: S2000 bill validator Post by: Ron (r273) on August 03, 2012, 11:33:12 AM How hard was it for you to get the current BV out. its about that hard to put a WBA in and get it connected to the machine. The only other hard part is getting the machine to recognize the new BV and configure it but it will do most of that when you turn the power back on. I would go for a WBA-13 but realize as soon a new bill the newest 100 (even though it is not released yet) is supported in the latest software the wba-13 Now if they release another new bill you I and many others will be looking for a different BV that will support that bill I will stick with JCM for now unless some one can say another brand beats them and can back it up. I think it was released last year, V-3.80-34. But finding it is another problem. http://jcmglobal.com/Libraries/Technical_Bulletins/Checking_of_UBA_Performance.sflb.ashx (http://jcmglobal.com/Libraries/Technical_Bulletins/Checking_of_UBA_Performance.sflb.ashx) http://jcmglobal.com/Libraries/Customer_Notifications/WBA_Product_Discontinuation_Notice.sflb.ashx (http://jcmglobal.com/Libraries/Customer_Notifications/WBA_Product_Discontinuation_Notice.sflb.ashx) Ron (r273) Title: Re: S2000 bill validator Post by: rickaaaer on August 03, 2012, 05:29:38 PM Well this one just fell out when I removed the screw. I have two other machines with the Mars bill acceptors also. I have not figured out whats holding then in I've looked and looked. Does anyone know how it comes out.
How hard was it for you to get the current BV out. its about that hard to put a WBA in and get it connected to the machine. The only other hard part is getting the machine to recognize the new BV and configure it but it will do most of that when you turn the power back on. I would go for a WBA-13 but realize as soon a new bill the newest 100 (even though it is not released yet) is supported in the latest software the wba-13 Now if they release another new bill you I and many others will be looking for a different BV that will support that bill I will stick with JCM for now unless some one can say another brand beats them and can back it up. I think it was released last year, V-3.80-34. But finding it is another problem. http://jcmglobal.com/Libraries/Technical_Bulletins/Checking_of_UBA_Performance.sflb.ashx (http://jcmglobal.com/Libraries/Technical_Bulletins/Checking_of_UBA_Performance.sflb.ashx) http://jcmglobal.com/Libraries/Customer_Notifications/WBA_Product_Discontinuation_Notice.sflb.ashx (http://jcmglobal.com/Libraries/Customer_Notifications/WBA_Product_Discontinuation_Notice.sflb.ashx) Ron (r273) Title: Re: S2000 bill validator Post by: rickaaaer on August 03, 2012, 05:32:21 PM How hard was it for you to get the current BV out. its about that hard to put a WBA in and get it connected to the machine. The only other hard part is getting the machine to recognize the new BV and configure it but it will do most of that when you turn the power back on. I would go for a WBA-13 but realize as soon a new bill the newest 100 (even though it is not released yet) is supported in the latest software the wba-13 Now if they release another new bill you I and many others will be looking for a different BV that will support that bill I will stick with JCM for now unless some one can say another brand beats them and can back it up. Well this one just fell out when I removed the screw. I have two other machines with the Mars bill acceptors also. I have not figured out whats holding then in I've looked and looked. Does anyone know how it comes out. Title: Re: S2000 bill validator Post by: rickaaaer on August 03, 2012, 07:33:10 PM Ok I checked the configuration . The limit is defaulted at 1000.00 on all. The rest of the configuration looked right. So thinking it might be the Mars bill acceptor. Going to try to change it out to a WBM-13 if I can find one. If not is there another model that will work? Thanks for all your help.
|