|
Title: Universal DBV145 to DBV200 Post by: startek2 on August 01, 2012, 05:54:23 PM I am trying to figure out how to upgrade this old universal ultra series slot to take the new bills. I know the 145 head is done, but what would i need to put a DBV200 head in it?
the model in it now is: JCM DBV-145-HH-6000-B644 DC 12V thanks!! Title: Re: Universal DBV145 to DBV200 Post by: leapyearguy on August 01, 2012, 08:01:22 PM a screwdriver
Title: Re: Universal DBV145 to DBV200 Post by: leapyearguy on August 01, 2012, 08:03:59 PM the IDO number is all important. the IDO is the format each manufacturer uses
Title: Re: Universal DBV145 to DBV200 Post by: uniman on August 01, 2012, 10:36:16 PM To my knowledge there is no JCM upgrade for the Ultra Series. When Universal went out of business JCM decided no upgrade was worth their effort for the HH.
With that said, I have recently seen old Uni Jumbo machines with BV's that are upgraded to take newer bills. But I believe they have MARS validators. The Ultra uses a GL-5 protocol. So if you could find another validator with an up to date GL-5 protocol you may be able to install it with some customization. Jim Title: Re: Universal DBV145 to DBV200 Post by: startek2 on August 02, 2012, 01:53:18 AM Thanks for the info. Is there any list out there or chart of some kind that lists what all these protocols are? I am getting up to speed on slot machines so I am soaking up as much information as I can..
Title: Re: Universal DBV145 to DBV200 Post by: leapyearguy on August 02, 2012, 02:16:19 AM PROTOCOL IDs
Interface Hardware Model Description Customers 001 DBV/EBA/IBA Parallel Code Interface IGCA 002 WBA/DBV Pulse Interface Various 002/003 WBA/DBV Pulse / Serial Various 003 WBA JCM Standard; bi-directional serial interface All 003B WBA Standard ID-003 with enhanced "B" interface for barcode instruments. Bally Systems. Harrah's Corporate 003WS WBA ***For WMS Games Only*** WMS 004/Bar DBV ID-004 with a few extra codes included for barcode ticket data passage. CDS, Amtote 011 DBV Bill acceptor must be reset in order to intialize Sigma 015 DBV Bi-directional serial interface, includes bar code messaging Sigma 022 DBV Measured pulse interface; defined by IGT IGT only 022/023 WBA/DBV Measured pulse interface; defined by IGT IGT only 023 DBV Similar to ID-022 IGT only 024 WBA/DBV Bi-directional interface designed by IGT; also known as "netplex" IGT only 033 TSP-02 SII compatible printer protocol Bally, Konami etc. 042 DBV Pulse mode only Leisure Entertainment 044 DBV Includes both pulse and 1-direction serial Bally (pre-2K), Williams, and others 044P DBV Interface designed to be backwards compatible with Bally Games Bally 044P/045P DBV Bally 045 DBV Contains a stack signal and messaging included to support barcoding Bally (pre 2K) 045P DBV Same as ID-045 with additional messaging Bally 045W DBV Requires stack signal for coupons only Williams 0C3 WBA Bi-directional serial interface designed several years ago Aristocrat 0D3 DBV-301 MDB Vending customers Enhanced AD-02 AD-02 Enhanced Interface. Source Technology, others MDB DBV-301 MDB (Not designated ID-0D3 because this is not manufactured by JCM) Vending customers Standard AD-02 Standard AD-02 interface EMN8 |