|
Title: LED Light replacement and Denomination Display Lighted for S+ Post by: kgs67 on August 06, 2012, 11:08:32 AM I was wondering who sells the LED Replacement 15 watt bulbs? The ones on Flea Bay is awfully High! and do they have the lighted Denomination Sticker like the S2000 have?
Thanks KGS67 Title: Re: LED Light replacement and Denomination Display Lighted for S+ Post by: Foster on August 06, 2012, 10:20:58 PM Let me see If I understand what you are looking for.
The only bulbs that I know of that are 15W are the F15T8 CW (Cool White) fluorescent bulbs. If you are trying to replace them you also have to get a matching power supply that may explain the added cost. S+ supplies 120VAC to the ballast for each bulb. S2000 the ballast supply voltage is 25V which makes it a bit cheaper to provide them for the S2000, the only DC supplies in a S+ are on the mpu and the BV supply. The S2000 has a switching supply the machine. All the voltages that come out of the S+ power supply in the bottom of the machine is AC 7-9V, 24V, and line As far as denomination I going to have to guess, are you referring to a label on the front of the door next to the BV bezel that lights up? If so those have become a bit rare and a bit pricey, the company that made them has discontinued them. There is also a BV bezel that shows last bill inserted only works with JCM DBV-200 and WBA-12/13 The only other denom label I know of is the multi-denom touch panel and light box. not practical for use on a S+, without making major mods to your player display, and no it cant be interfaced to the S+. best to build a small LED Board with a full bridge rectifier on it since all the small lanps are low voltage AC operation. |