|
Title: cleaning rust on relay plate Post by: Jeff99 on August 12, 2012, 10:24:10 PM Hi,
I just started digging into an 891 and it has some relays on the wiper boards that have rust on the solenoid plate. I popped the spring and the spring bracket from the rear of the relay so the plate is free on one side. Before I brake something I thought I would ask how can I take off the plate to bead blast it. Tipping it up seems like it should detach it from the nylon piece but it doesn't seem to just want lift out, and I was thinking the tangs might have been bent after installation making it hard to disassemble. Thanks, Jeff |