|
Title: Atronic Emotion King Kong Cash Printer "CB:Validation Buffer Full" Post by: djkompressor on August 20, 2012, 07:54:02 PM Hello guys,
I have the machine setup and everything works. Printing is fine. From time to time it will give me a validation error when the voucher is printing but is easily cleared by turning the audit key. After about 30-40 vouchers it gives an error "CB: Validation buffer full" I tried to set S5-6 S5-7 and S5-8 in different combinations and it still gives me the error. This is standalone and no network is connected. thanks, Title: Re: Atronic Emotion King Kong Cash Printer "CB:Validation Buffer Full" Post by: idesign on August 20, 2012, 08:24:33 PM I have mine set as follows:
Rotary switch S2 is set to 1, all other rotary are set to 0 S5 dips 2, 4 and 5 on, all others off S8 all off. Works fine for me. How is yours set up? Title: Re: Atronic Emotion King Kong Cash Printer "CB:Validation Buffer Full" Post by: djkompressor on August 20, 2012, 08:41:59 PM Right now its at
S5 2,4,6,7 ON S8 All off. Ill try that setting. THanks!! Title: Re: Atronic Emotion King Kong Cash Printer "CB:Validation Buffer Full" Post by: djkompressor on August 20, 2012, 08:44:28 PM oh and rotary settings are same as yours
Title: Re: Atronic Emotion King Kong Cash Printer "CB:Validation Buffer Full" Post by: idesign on August 20, 2012, 08:44:57 PM Right now its at S5 2,4,6,7 ON S8 All off. Ill try that setting. THanks!! So it prints with those settings but you eventually get the error? Title: Re: Atronic Emotion King Kong Cash Printer "CB:Validation Buffer Full" Post by: djkompressor on August 20, 2012, 09:05:14 PM Yes it eventually gets the error.
i tried S5 2,4,5 on doesn't detect printer or accounting system. what printer do you have? in the commboard manual it says s5-5 is overtaking progressive meters. Title: Re: Atronic Emotion King Kong Cash Printer "CB:Validation Buffer Full" Post by: idesign on August 20, 2012, 09:11:06 PM Yes, S5 is for the progressive so they don't lock up so that a lower progressive will overtake a higher one.
Printer is PSA-66-ST What KKC games are you running? Title: Re: Atronic Emotion King Kong Cash Printer "CB:Validation Buffer Full" Post by: djkompressor on August 20, 2012, 09:12:37 PM I'm running a Kkc crimson fire with the same printer
Title: Re: Atronic Emotion King Kong Cash Printer "CB:Validation Buffer Full" Post by: idesign on August 20, 2012, 09:14:17 PM Hmmm, must be the comm chips U34 and U35
Title: Re: Atronic Emotion King Kong Cash Printer "CB:Validation Buffer Full" Post by: djkompressor on August 20, 2012, 09:15:22 PM Ok after ram clear the initial setup detects printer with s5-6 on
But I tried that setting and still gives me an error. Do you think it could be a printer dip switch problem as well? I tried both 7 and 9 on and 7,9 and 10 on. Title: Re: Atronic Emotion King Kong Cash Printer "CB:Validation Buffer Full" Post by: djkompressor on August 20, 2012, 09:17:46 PM I'm running comm firmware s6
Title: Re: Atronic Emotion King Kong Cash Printer "CB:Validation Buffer Full" Post by: idesign on August 20, 2012, 09:39:30 PM Could be dips on the printer. It's odd that it prints for you that many tickets and eventually errors out
Title: Re: Atronic Emotion King Kong Cash Printer "CB:Validation Buffer Full" Post by: idesign on August 20, 2012, 10:23:30 PM I will reset my machine to your settings this weekend and see if I can duplicate your problem, and let you know what I come up with.
Title: Re: Atronic Emotion King Kong Cash Printer "CB:Validation Buffer Full" Post by: djkompressor on August 21, 2012, 02:23:30 PM ok sounds good, thanks bud
|