|
Title: Odyssey Tidbits Post by: gkfan on August 20, 2012, 09:15:28 PM Just a few facts from my 5 years with a couple working Odyssey machines. The factory WBA 13 SS validater loaded in one of my Odyssey by using the validator code "JCM". I did not have to change any eprom code.
MARS ZT 1000 parts were/maybe still are available from Australia. Do a Google search to find. Cash Cans can be found brand new from LA Slots. New drive sleds unpainted without hardware - LA Slots I have different NeoTec monitor mother boards in my machine. NT- 2602A is still available but good documentation would not be shared. Everyone talks about getting a cap kit try that with a NT- 2602A. Could not locate a NeoTec Monitor model number on the other machine. Let me know if you have NeoTec repair/manual/parts leads. LCD screen conversion has recently been done, check out the Odyssey Forum at Mr. Winter's site for pic's and model number info. My machines have brought me much fun and I have been able to keep them going. If you have old school PC skills you would be right at home in the Odyssey electronics cabinet. I need a few parts like a clean bill bezel, a coin drop guard, and electronics box door. Contact me if you're parting out an Odyssey machine. Title: Re: Odyssey Tidbits Post by: CVslots on August 21, 2012, 01:37:46 AM good info!!! good to know! thank you gkfan! :3- :3- :3-
i cant imgaine what the Odyessey would have been today if they stayed at it.... Title: Re: Odyssey Tidbits Post by: pinballjail on September 11, 2012, 11:00:51 PM Does that mean I can put a WBA 13 SS validater in my machine and it will work ?
Title: Re: Odyssey Tidbits Post by: gkfan on September 13, 2012, 08:45:49 PM Its more complicated than just dropping in a WBA 13 SS. The whole bill acceptor assembly is made for the WBA so you would need the Bill Can and the mounting hardware. I have included a pic of the wiring harness which may be special for this model. See the tag on the WBA unit regarding the wiring. Cannot say the if WBA unit has special firmware or not. I do know JCM is the validator type you need to enter in setup not WBA or Unknown. I do not know if this machine was a rebuild or factory stock. Very unusual all chrome front with player card reader slot under the Attendant Call light.
GKFAN Title: Re: Odyssey Tidbits Post by: Neonkiss on September 13, 2012, 09:36:55 PM So what gets modified on the head and transport that they taged it "Modified for Odyssey only Wire are cut"
Title: Re: Odyssey Tidbits Post by: gkfan on September 13, 2012, 09:39:14 PM No idea I have nothing to compare it to.
Title: Re: Odyssey Tidbits Post by: Neonkiss on September 13, 2012, 10:24:47 PM No idea I have nothing to compare it to. OH, I thought this was your modification. |