|
Title: Big Buck Hunter screen says "No Signal" upon power up? Post by: BR549 Auto Sales on August 21, 2012, 01:42:34 AM Any arcade guys out there know what may cause this problem and how to repair?
Thanks, David Title: Re: Big Buck Hunter screen says "No Signal" upon power up? Post by: knagl on August 21, 2012, 03:54:37 AM If a monitor says "no signal" when power is applied, it's the monitor's way of telling you that it's not getting a signal from the computer it is connected to. You'll need to figure out why the computer that is connected to the monitor isn't working -- it could be for a dozen different reasons.
Title: Big Buck Hunter screen says "No Signal" upon power up? Post by: BR549 Auto Sales on September 03, 2012, 10:14:01 PM Anybody out there ever had this problem and know how to resolve? The main computer is powering up from what I can tell, but it just shows the "no signal" message.
Thanks, David Title: Re: Big Buck Hunter screen says "No Signal" upon power up? Post by: Mr. Dinoman on September 03, 2012, 10:49:59 PM Do you actually see or hear the computer running?...Check that the fan is in fact turning on inside the computer?...If not, check the bios battery...IF it is dead, you will need to replace and reprogram the bios setting for the computer to turn back on after power failure...Hope this helps...
Jimmy Title: Re: Big Buck Hunter screen says "No Signal" upon power up? Post by: BR549 Auto Sales on September 03, 2012, 11:02:35 PM is that bios battery a 2032 @ the size of a dime? I will pull the power supply out and check the fan.
Thanks, David Title: Re: Big Buck Hunter screen says "No Signal" upon power up? Post by: Mr. Dinoman on September 03, 2012, 11:05:38 PM Usually...It will be on the main board...
Title: Re: Big Buck Hunter screen says "No Signal" upon power up? Post by: BR549 Auto Sales on September 03, 2012, 11:09:17 PM So if that battery is too weak, will that cause the "so signal" message?
Title: Re: Big Buck Hunter screen says "No Signal" upon power up? Post by: Mr. Dinoman on September 03, 2012, 11:25:34 PM If the battery goes bad, the bios setting in the computer will go to "default" which means when you turn on the machine with the standard power switch (which turn everything on) the computer will not turn on therefor giving you the "no signal" on the monitor...The bios must be set for the computer to restart after turning of the game power...
Jimmy Title: Re: Big Buck Hunter screen says "No Signal" upon power up? Post by: BR549 Auto Sales on September 03, 2012, 11:28:12 PM Even though I see lights on the front of the computer and I hear it running? I don't know if this matters or not but when it is on, the cd rom door will not open when I push the button on it.
Title: Re: Big Buck Hunter screen says "No Signal" upon power up? Post by: Mr. Dinoman on September 03, 2012, 11:36:51 PM Now it is starting to sound like the power supply inside the computer...Get a keyboard and hook it up and watch the screen as it is trying to boot-up...Try to access the bios and see if everything is set correctly...You can also remove the computer and hook it up as a home computer and see if it boot up to anything...Can you hear the CD turning?...My guess it is the power supply or bios settings...
Title: Re: Big Buck Hunter screen says "No Signal" upon power up? Post by: BR549 Auto Sales on September 03, 2012, 11:39:19 PM I can't hear the cd running
Title: Re: Big Buck Hunter screen says "No Signal" upon power up? Post by: Mr. Dinoman on September 03, 2012, 11:42:01 PM Again, sounds like power supply...
Title: Re: Big Buck Hunter screen says "No Signal" upon power up? Post by: BR549 Auto Sales on September 04, 2012, 01:19:50 AM ok thanks, I will order a new one and try it.
|