|
Title: converting from nickles to quarters Post by: subsailor on August 21, 2012, 04:20:27 PM Hey Folks!!!
I was wondering what I need to do to the hopper to convert from nickles to quarters? I have gotten the larger coin entry plate, and I know to use the set chip to set the bv to .25. What needs to be done to the hopper? Thanks!!!! Dave Title: Re: converting from nickles to quarters Post by: Jim on August 21, 2012, 04:44:42 PM you will need a new coin in optic ( black part directly beneath the coin comp.)
hopper: you will need a shelf and pin wheel for quarters. a nickle pin wheel has too many nubs to be able to use for quarters. the new shelf wheel is smaller to compensate for for the larger type coin, this keeps it at the same position so the coin can roll off the knife. may want to inspect that as well, if the tip does not come to a chisel point , then you may want to replace it as well. Hope this helps Jim Title: Re: converting from nickles to quarters Post by: subsailor on August 21, 2012, 05:40:13 PM Thanks Jim!!! :131-
I appreciate the assistance!! Dave |