|
Title: cds american pride Post by: chiptaker on February 15, 2009, 08:10:55 PM I'm getting the following error message "mon port dwn" any assistance would be appreciated.
Title: Re: cds american pride Post by: StatFreak on February 16, 2009, 12:31:05 AM Welcome to NLG chiptaker. :88-
I saw both of your posts. We don't have too many CDS experts, but hopefully someone will be able to help you. Title: Re: cds american pride Post by: stayouttadabunker on February 16, 2009, 02:16:18 AM hey chiptaker, welcome to NLG!
Check the wires going to your monitor from the motherboard...it might be loose... Title: Re: cds american pride Post by: chiptaker on February 16, 2009, 01:11:56 PM Thanks I'll try that
Title: Re: cds american pride Post by: Simon Barsinister on February 16, 2009, 01:42:25 PM Within your options, you will find a setting for your type of 'System'. Within this option you will see that there will be choices such as "GDAP", "Bess", or "SAS" for example. Change this to 'NONE'.
Title: Re: cds american pride Post by: chiptaker on February 16, 2009, 04:01:37 PM Ok.. done that but when i go into machine test @bil val its gives a code Failure (transp speed) ? im lost
Title: Re: cds american pride Post by: knagl on February 17, 2009, 08:13:16 PM It's telling you that there's an error with the dollar bill validator (possibly that the speed of the bill going through the transport is incorrect due to a weak or malfunctioning motor). Is that a known good validator? Are you able to get past the validator error and use the game with coins (start there, and then we can worry about the validator later)?
Title: Re: cds american pride Post by: chiptaker on February 18, 2009, 03:30:21 AM yes, I can use coins but the bill val wont take bills, the val resets but wont take them.
Title: Re: cds american pride Post by: knagl on February 18, 2009, 03:53:04 AM Do you have a known good validator assembly you can try swapping in? At a minimum, it seems like you may need a new transport based on the error it's giving you.
Title: Re: cds american pride Post by: chiptaker on February 18, 2009, 04:36:11 AM i'll try that in the morning i'll get back to you, thanks
SPECIAL THANKS NLG...... PROBLEM WITH BILL VAL FINISH.. MAKE SURE YOU MACHINE IS WARMED UP! |