|
Title: Bally 1095 Post by: drfreeze1739 on August 25, 2012, 04:55:05 PM I cant find any info on this bally machine i have,,
The tag say's 1095-1 But found a paper tag in side that sayed 1088 Dose any one know this machine??? There is no multiplyer in the top..... Theres just a bell and a gong.. Title: Re: Bally 1095 Post by: shortrackskater on August 25, 2012, 09:24:07 PM PICTURES would help...inside and outside. I'm not the expert but that's the first thing they may ask. :211- I have some Bally books. I may be able to find it in there.
Title: Re: Bally 1095 Post by: drfreeze1739 on August 25, 2012, 11:19:30 PM Pics
Title: Re: Bally 1095 Post by: drfreeze1739 on August 25, 2012, 11:20:48 PM More pics
Title: Re: Bally 1095 Post by: drfreeze1739 on August 25, 2012, 11:22:01 PM Pics
Title: Re: Bally 1095 Post by: shortrackskater on August 25, 2012, 11:47:19 PM Well I'm out! It could be an E series...since it's full of circuit boards. I'm assuming it's not working? If I'm assuming correctly I would check each and every connector as well as all the IC's to make sure they're snug in the sockets. I'd also look for any batteries on the boards and make sure they're not leaking and have proper voltage. Hopefully someone else who really knows will chime in soon!
Title: Re: Bally 1095 Post by: drfreeze1739 on August 25, 2012, 11:55:27 PM I had one of these before. it was a e2224.
My other one i had it sayed e2224 on the outer tag. no its not working... It lights up and thats it.. I have checked all fuses and molex plugs.. I looked at all the boards and all look good.. It MIGHT be the power board like my other one was... Will have to test it and see.... It just through me off because i cant find any info on this 1095 model number... Title: Re: Bally 1095 Post by: Neonkiss on August 26, 2012, 12:43:51 AM E-1000 series.
Check the connectors on the RAM board. Then look at the battery for the RAM board. Someone has been monkeying around with that. The edge connectors break on those all the time. Title: Re: Bally 1095 Post by: drfreeze1739 on August 26, 2012, 01:10:06 AM The battery board looks all croded and looks realy bad..
Mabey this could be a issuse... Here are some pics of the batter board.. Title: Re: Bally 1095 Post by: drfreeze1739 on August 26, 2012, 01:11:22 AM more pics of batter board
Title: Re: Bally 1095 Post by: Amachanic on August 26, 2012, 02:20:42 AM Wow that Ram board looks trashed. Battery acid eats the connections and board traces. There was a person on here about 6 months or so back that was talking of making a replacement ram board for the 1000 series. I wonder how it going or if he gave up?? Has anyone heard anything??
Gary Title: Re: Bally 1095 Post by: drfreeze1739 on August 26, 2012, 02:57:09 AM Dose any one know where i can buy one????
I sure hope i can find one..... Title: Re: Bally 1095 Post by: Neonkiss on August 26, 2012, 12:20:43 PM Dose any one know where i can buy one???? Check with FoxSlots1 at theI sure hope i can find one..... Title: Re: Bally 1095 Post by: drfreeze1739 on August 26, 2012, 01:12:28 PM All ready asked him.
He dont have any ram boards... Title: Re: Bally 1095 Post by: drfreeze1739 on August 27, 2012, 02:38:02 AM If any one has one to sell let me know...
or if any one can repair the one i have or make one please let me know..... Im realy in need for one..... Title: Re: Bally 1095 Post by: drfreeze1739 on September 06, 2012, 03:21:43 PM Ok. Got new Ram board...
I installed it last night and it did help on some stuff working. I can run through the test and every thing works when test mode. But when i hit the coin in switch it will only do 1 coin in and thats it. It is a 5 coin machine. Then when i spin the reels with the one coin in the reels wont stop spinning unless i hit the reset button..... The front LCD only shows 1 diget numbers..... The front door coin switch was replaced... Dose any one know what wire goes where on the coin switch????? There is 4 wires there. ( 2 brown 1 black with red line 1 black).. There is 3 connections on the coin switch... |