|
Title: No Power to Ballasts Post by: kevinleedrum on August 26, 2012, 03:15:48 AM Hello everyone, sorry to be a bother, but I have an issue with an I-Game Wild Cherry that my dad purchased. I'm more of a pinball guy, so I need a little direction. I'm not getting any voltage from the connections that go into the ballasts (both the top and bottom lights). Is there a common cause for this that I should check first? If it helps, the 13V lights on the front work fine. I followed the wires from the bottom ballast, and they appear to go to a cabinet I/O board, and then to the backplane. There is an empty connector on the front side of that removable cabinet I/O board; is that supposed to be empty?
Thanks for any help :) Title: Re: No Power to Ballasts Post by: kevinleedrum on September 21, 2012, 03:58:19 PM Just ended up replacing the power supply, and the fluorescents work fine now, as does the sound (which wasn't working either).
Title: Re: No Power to Ballasts Post by: cowboygames on September 21, 2012, 04:19:59 PM Glad you got that fixed. In an S2000 machine that plug on the front of the cabinet IO board is where the harness for light control on back lit reels goes
Title: Re: No Power to Ballasts Post by: nikstar on September 21, 2012, 07:33:25 PM Hello everyone, sorry to be a bother, but I have an issue with an I-Game Wild Cherry that my dad purchased. I'm more of a pinball guy, so I need a little direction. I'm not getting any voltage from the connections that go into the ballasts (both the top and bottom lights). Is there a common cause for this that I should check first? If it helps, the 13V lights on the front work fine. I followed the wires from the bottom ballast, and they appear to go to a cabinet I/O board, and then to the backplane. There is an empty connector on the front side of that removable cabinet I/O board; is that supposed to be empty? It looks like your Power Supply was missing the 24v.Thanks for any help :) |