New Life Games Tech Forums

**Reel Slots** Gaming Machines => Bally Reel Games. => Topic started by: Red7 on August 27, 2012, 03:21:08 PM



Title: S6000 Spin to with 99.2 Code
Post by: Red7 on August 27, 2012, 03:21:08 PM
Hey has anyone seen this code before?

The machine will sit there just fine, no issues.. then once every 2 hours or so.. It beeps then shows 99 in the win window and 2 in the paid window.. If i open the door and close it, it clears..

Just wondering what would cause this on idle.. with no one playing it..

Thanks

Steve





Title: Re: S6000 Spin to with 99.2 Code
Post by: Koni on August 29, 2012, 09:34:28 PM
Hey has anyone seen this code before?

The machine will sit there just fine, no issues.. then once every 2 hours or so.. It beeps then shows 99 in the win window and 2 in the paid window.. If i open the door and close it, it clears..

Just wondering what would cause this on idle.. with no one playing it..

Thanks

Steve




Steve,
I have two of these machines and never have I seen a 99 code. The codes in the manual only go up to 91?? Not sure what this is. Is it doing anything else strange while in play mode? By the way I just sent you a pm.
Koni


Title: Re: S6000 Spin to with 99.2 Code
Post by: Koni on August 29, 2012, 09:35:46 PM
Hey has anyone seen this code before?

The machine will sit there just fine, no issues.. then once every 2 hours or so.. It beeps then shows 99 in the win window and 2 in the paid window.. If i open the door and close it, it clears..

Just wondering what would cause this on idle.. with no one playing it..

Thanks

Steve




Steve,
I have two of these machines and never have I seen a 99 code. The codes in the manual only go up to 91?? Not sure what this is. Is it doing anything else strange while in play mode? By the way I just sent you a pm.
Koni
Are you positive it is 99?
Koni


Title: Re: S6000 Spin to with 99.2 Code
Post by: daddy2yea on August 29, 2012, 10:04:19 PM
-Code-    - Description -                      -Definition-
  99        Severe Failure         An error has been detected with the
                                         MPU board. A diagnostic self check has
                                         determined that memory is uncorrupted.
                                         The error is recoverable


Title: Re: S6000 Spin to with 99.2 Code
Post by: Red7 on August 29, 2012, 10:41:12 PM
Yeah its a 99 in the wind paid.. and a 2 in the credits...

If the machine sits there on idle for a couple hours.. I will here the error tone.. and check machine and that's what it says.. I open the door and close the door.. it puts the credits back in the credit window.. and everything is normal again..

I know i could not find anything on "99" as well..

Thanks for your input..

Maybe I will have to get new ram chips?





Title: Re: S6000 Spin to with 99.2 Code
Post by: coorslight115 on August 30, 2012, 02:01:43 AM
I have seen low batteries give weird codes..have you checked the battery voltage?


Title: Re: S6000 Spin to with 99.2 Code
Post by: Red7 on September 04, 2012, 01:58:02 PM
I did when i got the machine.. I will swap battery just to make sure..

Thanks

Will let you know..

Steve