|
Title: Manual and model? Post by: eken on February 17, 2009, 09:58:57 AM First, I want to thank for a super good page! And I want to apologize for my poor English. Hope you understand.
Chasing a manual for my machine! It is an aristocrat and the game has top spot. Do not know much more. Have problems with the hopper and the coin optics. And I need to know how to set the dip switches. took some photos, maybe someone can help me on the road. Title: Re: Manual and model? Post by: eken on February 17, 2009, 10:02:24 AM some errors which I found..
has SLOT but do not know which wires to be connected Title: Re: Manual and model? Post by: StatFreak on February 17, 2009, 11:52:17 AM Welcome to NLG eken!
What specific problems are you having? It looks like the hopper is covered in mineral deposits in the last picture (from exposure to water or moisture?). :103- Or is it metal powder from coins? If either one, that might be a place to start. Title: Re: Manual and model? Post by: Ron (r273) on February 17, 2009, 03:54:26 PM Yes welcome to NLG. You have an e-mail too.
Ron Title: Re: Manual and model? Post by: eken on February 17, 2009, 05:15:56 PM email: daddy_ek(#)hotmail.com
hopper optics missing holder. + error mess: coin in photo and its no coin Mech have one but nu manual for the cables. Thanks EMAIL MODIFIED BY MODERATOR TO PREVENT SPAM Title: Re: Manual and model? Post by: eken on February 17, 2009, 07:39:16 PM Thanks Ron (r273)!!
helped me a lot :131- the printer had to work! * still need help with the payout procent settings. * how to wire a coin reader (http://www.coinopexpress.com/products/parts/cash_handling/CPU_Comparable_Electronic_Coin_Mech_1411.html (http://www.coinopexpress.com/products/parts/cash_handling/CPU_Comparable_Electronic_Coin_Mech_1411.html)) Title: Re: Manual and model? Post by: eken on February 21, 2009, 07:29:00 PM :25- :25- :25- :25- :25- :25- :25- :25- :25- :25- :25-
found a cables end... :S but what is it? pin 1 yellow 5v pin 2-4 blank 5-8 twisted green 9,10 blank 11,13 twisted red 12 black ground could it be to a bill validator or under cabinet images show both ends of the cable. |