|
Title: Game King Monitor Problem Post by: tacman on September 18, 2008, 08:46:57 PM kooter
Gameking monitor problem « on: June 28, 2006, 04:15:02 AM » -------------------------------------------------------------------------------- Hi! My touch screen monitor on my gameking stopped working all of a sudden. It shows the graphics but when you touch the screen nothing happen. I've tried to recalibrate . Screen message says"hold button until sound stop" but no button to hold shows up. kooter belbenchtech Re: Gameking monitor problem « Reply #1 on: June 29, 2006, 07:58:19 AM » -------------------------------------------------------------------------------- I'm assuming your touch screen control board is a IGT P/N; 75423903...sounds like you're missing the "dot" to calibrate the touch screen, if so, change C47(10uf,50V), C48(47uf,50V), C49(47uf, 50V), C50(47uf, 50V), C51(47uf, 50V), & C52(10uf, 50V)...this will bring back the calibration "dot"... Good luck! Mike><> kooter Re: Gameking monitor problem « Reply #2 on: July 03, 2006, 02:42:46 PM » -------------------------------------------------------------------------------- Thanks Mike This morning turned the machine back on and it started working. Re calibrated and the "Dot" appeared. Don't know what was wrong. Thanks for your advice. Kooter russ1982ny Re: Gameking monitor problem « Reply #3 on: July 12, 2006, 05:36:32 PM » -------------------------------------------------------------------------------- This can also be a problem with the netplex line. Check for a loose printer cable, something like that. It's happened to me more than once. |