New Life Games Tech Forums

I just picked up a Jennings 400 and the previous owner installed a new power cord. When i plug it in I get most of the lights but no insert coin and no led light. I found the two wires coming from the transformer right side had been left off. I don't want to hook them back up since I do not know what wire goes where. I looked at the diagram on jenningsslots.com but my wires don't seem to be going to the same place on the lower distribution block that the power cord goes to. Is there any one that can send me a few pics of there transformer wires or draw me a basic diagram of where the 6 transformer wires go and how the power cord should be wired to the lower block.

Thanks,
Jon