|
Title: Bally e1090 help needed Post by: midas touch on September 10, 2012, 09:11:10 PM Could anyone help me troubleshoot my Bally machine...After lots of cleaning and fixing noticeable problems I fired up this machine and got a 7 on the left hand side of display and a quick 6 on the rightside of display and blank leds in middle when I press reset..I then removed mpu and cleaned all terminals including piggyback boards...I now have a 5 showing in place of the 7...The reset button will sometimes activate the solenoids and test button doesn't do anything. The middle leds on display board are always blank...............Thanks to all
Title: Re: Bally e1090 help needed Post by: tkrozleski on September 11, 2012, 07:52:26 PM Maybe try reseating the 5101 chips on the RAM board.
Title: Re: Bally e1090 help needed Post by: midas touch on September 12, 2012, 12:47:05 PM I did find that some of the connectors on the ram board were not making contact... To be more specific ..the terminals on the mpu that connect it and the ram board together were not touching..I ordered new connectors from foxslots .....so we ll see what happens once those are installed...Mark
|